What are the data rates if I only want to record the program output via the USB-C?

If you are only recording, or you have more internet bandwidth and want higher quality, then there are three data rate settings based on the higher HyperDeck Studio Mini quality settings. These are a good quality data rate when you need broadcast quality streaming and recordings.

• HyperDeck High which will stream and record at 45 to 70 Mb/s
• HyperDeck Medium which will stream and record at 25 to 45 Mb/s
• HyperDeck Low which will stream and record at 12 to 20 Mb/s

The data rate used by the quality setting will change depending on the video standard ATEM Mini Pro is running at. The lower number is used for the lower frame rates of 24p, 25p and 30p, while the higher data rates are used when you are running higher frame rates of 50p and 60p.

Bitte beachten Sie, dass nur angemeldete Benutzer Fragen stellen können.